Diy Furniture Ideas For DIY Barn Wood Cart Coffee Table For $50 – Free Plans & Video Tutorial

Hey friends!  You are going to LOVE today’s build!  We are sharing the cutest farmhouse DIY Barn Wood Cart Coffee Table!  Before we get started, be sure to check out the YouTube video tutorial HERE or below!

DIY Barn Wood Cart Coffee Table

Be sure to download and print the FREE PLANS HERE!

How cute did this baby turn out?  Isn’t the top GORG??  We got the barn wood for this table from Porter Barn Wood, and they have made two special bundles on their site so you can purchase exactly how much you will need for this table… How cool is that? You can see the links to both bundles below!

Pre-finished Snow White barn wood –…

Unfinished barn wood bundle –…

Here are the other goodies!

Link to the white paint used on the table

Link to corner hardware

Link to the rug

Link to metal casters

DIY Barn Wood Cart Coffee Table

DIY Barn Wood Cart Coffee Table – Shelf Assembly

The first step to building the table is to create the bottom shelf assembly. We used 2×4 boards for this part and ripped the boards to 3” wide each with our table saw. You don’t have to rip your boards on this part, but it will change the overall dimensions, so be sure to make those changes. We made 3/4“ pocket holes around all sides of the plywood panel. We also added 1.5” pocket holes to the ends of each long board. Attach the long sides of the panel to both sides using wood glue and 1.25” pocket hole screws. The plywood for the bottom shelf will be flush with the top of the 2×4 boards.

DIY Barn Wood Cart Coffee Table – “Top of the Table To You”

Moving on to the top of the table. This will be assembled identical to the first shelf assembly, but the depth of the plywood will change. Grab a coupld scraps of the barnwood or planks you are going to use on the top. Lay them flat on a table, and lay the plywood on top of them with the pocket holes facing up. Now attach the long boards first using glue and 1.25” pocket hole screws. After those are attached, you can attach the shorter ends. These will attach with both 3/4 and 2.5” pocket hole screws.

DIY Barn Wood Cart Coffee Table – The Legs

Time for legs! These are just 2×4 pieces we have cut to 12” each.Add 1.5” pocket holes to one end of each leg piece. Attach the legs to top of the table using wood glue and 2.5” pocket hole screws. The legs with sit flush on both sides.

DIY Barn Wood Cart Coffee Table – Attach Bottom Shelf

Once the legs are attached, it’s time to attach the bottom shelf. Lay the top of the table face down with the legs sticking up. Add glue to the bottom of each leg piece and lay the shelf upside-down on the legs. Make sure each leg lines up flush and attach them to the table using 2.5” wood or Spax screws through the base and into each leg.

The final building step is to lay each plank in place. These will be cut to 20” long each. Attach each piece using wood glue and brad nails. Just make sure the length the nails isn’t longer than the width of the planks and plywood combined. Once you have finished that, you can paint or stain and add your hardware!  Because I was using pre-finished white barn wood from Porter Barn Wood, I painted the table before adding the planks.  Check out these planks….

And here it is one more time all finished!

DIY Barn Wood Cart Coffee Table


DIY Barn Wood Cart Coffee Table

DIY Barn Wood Cart Coffee Table

Leave a Reply

Your email address will not be published. Required fields are marked *